FROM http://debii.curtin.edu.au/~pedram/ppc/3-ppc/65-optus-internet-and-mms-settings-for-any-pdas.html
I liked to have Internet and MMS on my PDA/PPC (Gigabyte G-Smart 64) but it was not listed on Optus website and I called customer service to get support they said that "Unforetunetly we can not support your phone in our network!!!".
So I treid my best to set in manually and today I finally got it worked! I shared the information regarding to how to setup and configure MMS and Internet on any pdas with optus service. Hope guys in technical department of Optus see my page ;)
For Internet:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections Icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Optus WEB in the Enter a name for the connection field.
7. Select Cellular Line (GPRS) in the drop down list of Select a modem.
8. Tap Next.
9. Enter internet in the Access point name field.
10. Tap Next.
11. Enter in the User name field or otherwise leave it blank.
12. Enter in the Password field or otherwise leave it blank.
13. Tap Advanced.
14. Select Use server-assigned IP address.
15. Tap OK.
16. Tap Finish.
for some pdas it is compulsary to set proxy for internet connetion if so in step 9 instead of "internet" put "wap.optus.net.au" and for proxy setting put "202.139.83.152" and port "8070".
For MMS:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections icon.
5. Under My ISP, tap on Add a new modem connection.
6. Enter Optus MMS in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list of Select a modem.
8. Tap on Next.
9. Enter mms in the Access point name field. Tap on Next.
10. Enter in the User name field.
11. Enter in the Password field.
12. Tap Advanced.
13. Select Use server-assigned IP address. Tap OK.
14. Tap Finish.
15. Tap OK.
16. Tap on Settings.
17. Tap on Messaging.
18. Tap on Menu which is located at the bottom right corner.
19. Tap on MMS Configuration.
20. Under Servers, tap on New.
21. Enter Optus MMS in the Server name field.
22. Enter 61.88.190.10 in the Gateway field.
23. Enter 9201 or Permanent, non-secure in the Port number field.
24. Enter http://mmsc.optus.com.au:8002 in the Server Address field.
25. Select My ISP in the Connect via drop down selection.
26. Select WAP 2.0 in the WAP Version drop down selection.
27. Tap on OK.
28. Tap on Set As Default.
29. Tap OK.
if setting above doesnt work change the port address on step 23 to "8070" then try again.
Cheers,
Pedi
Wednesday, June 24, 2009
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment